The Fast Cycle concept

steelco-fast-cycle-medicalA fast cycle washer disinfector can save over 54.000 liter of water in an year of average use, it is worth!

Save time
big capacity pre-heating tanks directly connected through large valves, into the washing chamber, grant effective results in reducing cycle time.

Save water
he water recirculation tank grants the recycling of the disinfection water into the next washing cycle with the reduction of energy and water consumption.

Save energy
cycle time reduction and thermal insulation.

1, 2, or 3 tank configurations applied to a 5 phases fast cycle

5phaseSteelco fast cycle machines tank configuration can vary in numbers, function and heating temperatures to best suit customer procedures. The following table shows examples of a 5 phase fast cycle configuration. Temperatures are referred to pre heating tanks, higher temperatures up to 93°C/199°F are then reached by sump heating.

tank-3-steelco-fastcycle

The pre heated 85 °C / 185 °F demineralized water tank allows to radically reduce thermodisinfection process time and consequently total cycle time.

Pre heated demineralized water flows directly with the shortest possible connection to the washing chamber without pump activity and minimizing heat loss.

 

tank-steelco-fastcycletank-3-steelco-fastcycle

The pre heated 65 °C / 149 °F hot water washing tank allows to reduce washing process time and consequently total cycle time.

The same tank is then used to pre heat the rinsing water while the machine is performing the washing phase. Saving heating time avoids washing chamber to cool down thus reducing energy loss.

The pre heated 85 °C / 185 °F demineralized water tank allows to radically reduce
thermodisinfection process time and consequently total cycle time. Pre heated demineralized water flows directly with the shortest possible connection to the washing chamber without pump activity and minimizing heat loss.

tank-water-steelco-fastcycletank-steelco-fastcycletank-3-steelco-fastcycle

The needed amount of pre wash cold water flows from the first tank directly to the washing chamber rapidly and without any pump activity.

The pre heated 65 °C / 149 °F hot water washing tank cuts down "in chamber" water heating time allowing to reduce washing process time and consequently total cycle time.

The same tank is then used to pre heat the rinsing water while the machine is performing
the washing phase. Saving heating time avoids washing chamber to cool down thus reducing energy loss.
Following customer procedures, pre heated rinsing water can be recycled from the previous cycle thermodisinfection water thus adding a significant energy, water and time saving.

The pre heated 85 °C / 185 °F demineralized water tank allows to radically reduce
thermodisinfection process time and consequently total cycle time. Pre heated demineralized water flows directly with the shortest possible connection to the washing chamber without pump activity and minimizing heat loss.

This website uses cookies to manage authentication and navigation statistics.
By using our website, you agree that we can place these types of cookies on your device.