About
US English
Every drop counts!
Water consumption represents one of the primary consumptions for an SPD, with average annual water consumption that can be as high as 6.458.400 liters (considering a typical university hospital with four units of 18 STU sterilizer with house steam -15 cycles per day, 6 days a week, 52 weeks a year). Even though our sterilizers are already efficient compared to corresponding competitor models, our state-of-the-art ECO technology provides unrivaled efficiency levels, reducing energy and water consumption with the lowest operating costs per load. Water usage can be significantly reduced to less than one-tenth.
Two Configurations Available
ECO 1
Equipped as standard in all our sterilizers, this water-saving package is part of Steelco's environmental water-saving policy. This solution enables an average water consumption reduction of 35%, with less water required to cool the drain before discharge.
ECO 2
This option involves the use of water from a chilled water loop. It allows over 90% reduction of total water usage by the vacuum pump thanks to a set of high-efficiency heat exchangers. Drain water is also cooled without needing separate tap water to lower the temperature before discharge.
Related Products
VS L – Small & Medium Capacity
Steam Sterilizers - Chamber Volume from 110 to 920 l / 4 to 32 cu ft
VS L – Bulk Capacity
Steam Sterilizers - Chamber Volume from 920 to 9.070 l / 32 to 320 cu ft